Why does your toilet clog?
Toilet clogs could indicate a problem. You could have a problem with your plumbing or your toilet.
- A low-flow model older is also available.
- Items not to be flushed were flushed
- Too many uses of toilet paper
- The Toilet Trap is Blocked
- Toilet vent blocked
- Your sewer line is blocked
Our Indianapolis plumbers explain the most common reasons why your toilet clogs. They will also discuss what you can do about it.
Toilets with lower flow older models
A fixture in your toilets that is older than low-flow could cause clogging. High flush pressure can lead to material being left behind, which can cause constant clogs.
What should I do?
If replacing your toilet is impossible, you can reduce the amount and quality of your small corner toilets paper.
Low flow toilets are typically manufactured in the mid-1990s. If your toilet is old, a plumber can help you select the right toilets and install them.
Flushing non-flushable items
Only human waste, toilet paper, and personal hygiene products can be flushed down the toilets.
This type of constant clog problem affects all households. Plumbers are most familiar with the “flushable wipes”, which are commonly found in bathrooms.
What should I do?
Clear clogs due to improper materials in drains can be done with a plumber.
Take the time to tell your family what to keep out and what to dispose of.
Excessive Use of TP
Toilet paper can be used for flushing the toilets, but it must not exceed the recommended amount. Too much toilet tissue can block the drain and cause clogs.
Some 2-ply toilet paper won’t dissolve as quickly as other types, causing clogs.
What should I do?
The majority of people use 8-9 squares per use of tissue. To ensure that your family uses the right amount of toilet paper each time you go to the toilet, mark the appropriate length on the wall or cabinet.
Fold your ultra-plush toilet tissue sheets to create the desired thickness. You can avoid clogs by being more careful when using your toilet tissue.
Toilet Trap Clogged
Most homeowners are familiar with the P trap on a sink. But did you know there was a trap for your toilet? It is not a rectangular P shape, located between the toilet bowl and the drain line and traps objects and prevents them from blocking the drain line.
This fixture is where most items get stuck. Toilets can clog when there is too much waste.
What should I do?
You can use a plunger to remove the blockage from your toilet’s trap.
If the plunger fails, a toilet auger can be used. If there is resistance just beyond the drain of your toilet bowl, this is an indication that the trap is blocked. You can then rotate the auger to break the material up and grab the handle to clear the drain.
You May Also Like: Reasons To Opt For Home Tuition in Singapore.
Toilet Vent Blockage
You may not know that your home’s toilets are connected to a vent outside your home. The vent is typically located on the roof. It allows fresh air to enter the plumbing system of your home, increasing the pressure in the flushes.
Toilets lose their flushing power if the vent is blocked. Other problems in the home include gurgling noises from the toilet, slow drainage around your house, and sewer smells inside.
What should I do?
Toilets vents can get blocked if they are connected to your home’s sewer line. If you suspect that your toilet vent is blocked, check your roof.
- Use a spotter or a ladder to safely climb onto your roof. The vent for the no clog toilet is located usually above your main bathroom.
- Remove the cap to check for debris. Reach into the vent to remove any debris.
- Use the spray nozzle on your garden hose to send water down the vent. If it is blocked, water will back up.
- Install a toilet auger into the vent. However, the toilet auger should be at least 20 feet long. It will not reach the vent connection or sewer line if it is shorter than that.
- Check that your toilet is clear of obstructions. Call a plumber if the water is not backing up.
Sewer Line Clogged
Blockages in drain lines and plumbing fixtures can lead to blockages in your main sewer line. These can be difficult to repair.
Sewer line damage, tree root penetrations, and infiltrations may cause sewer lines to become blocked.