Weak network signals are one of the most common causes of AT&T internet disconnections. The performance of your wireless connection is determined by the strength of your in-home ATT Wi-Fi network signal. An inconsistent internet connection is frequently caused by a lack of signal range.
Step 1. To fix Wi-Fi not working, restart your modem and wireless router.
This issue is most likely caused by an issue with your Internet Service Provider (ISP). You can reconnect to your Wi-Fi service by restarting your modem and wireless router.
Anyone who is connected to the network will be briefly disconnected while you do this.
1) Turn off the power to your wireless router and modem (remove the battery if your modem has a battery backup).
2) For 30 second hold your breath.
3) Reconnect the power source to your Wi-Fi connection and modem. (put the battery back to the modem).
4) Connect your device to your Wi-Fi network.
Step 2. To fix Wi-Fi not working, check if the Wi-Fi signal is blocked.
We’ve all heard that the weaker your Wi-Fi signal is, the worse your Wi-Fi performs. So keep an eye out for anything that might be interfering with your Wi-Fi signal’s connection. Here are a few situations that could happen:
1) To get a better ATT Wi-Fi connection, place your router in the center of the room and ensure that you are as close to it as feasible.
2) Check to see if there are any obstructions blocking your router’s path, as this may influence its performance.
3) Thick barriers can lower Wi-Fi signal strength and prohibit you from connecting.
4) Make sure no devices, such as your cordless phone, microwave oven, or Bluetooth speaker, are interfering with your Wi-Fi signal. If these devices use the same 2.4 GHz or 5 GHz frequencies as your Wi-Fi, it’s possible that your Wi-Fi signal will be hampered. Turn off those devices for a while and connect to your computer.
The issue is due to the Wi-Fi signal if your Wi-Fi reconnects after acquiring a better connection. Try moving your device closer to your network or obtaining a Wi-Fi range extender to solve your problem.
Read Also- ATT Router Login
Step 3. To fix ATT Wi-Fi not working, change the frequency and channel of your Wi-Fi.
If your ATT Wi-Fi stops working in crowded apartments due to too many individuals connecting to the same Wi-Fi channel at the same time, you can remedy the problem by changing your Wi-Fi frequency and channel.
Final Words
The most prevalent ATT Wi-Fi network frequencies are 2.4 GHz and 5 GHz. Many routers now offer dual-band capability, allowing them to operate at both 2.4 and 5 GHz. When 2.4 GHz connections are overcrowded, your dual-band router will automatically switch to 5 GHz transmission.
Read More Articles!