Window screens get affected by various reasons resulting in their replacement. Standard window screen replacement can be a daunting task, but with the right tools and a little know-how, it can be a relatively easy process.
There are a few things to keep in mind when replacing window screens, such as the type of screen material, the screen size, and the window’s frame.
These are usually made of three different materials: aluminum, fiberglass, or polyester. Aluminum screens are the most common type, as they are inexpensive and easy to work with.
Fiberglass screens are more durable than aluminum screens but can be more difficult to install. Solar Screen Frame Materials are the most demanding screen type but are also the most durable and easy to clean.
When replacing window screens, measuring the screen before purchasing a replacement is important. The size of the screen will determine the size of the replacement screen. It is also important to measure the frame of the window.
How will you replace the window screen? Here is the step-by-step explanation of the whole process-
Steps for removing the window screens-
Gently remove the old screen
First, you need to remove the damaged screen from the window frame. The screen is attached to the plastic cover, which runs around the metal plate.
Use tools like a nail punch, screwdriver or any other sharp instrument that can help lift the screen gently.
Standard window screen replacement is not easy and can be performed alone.
Measure the accurate screen size
Select the frame material & style which you want to use in the window. It can be new or the same as the old material. Measure the exact size of the new screen; otherwise, it can be the main concern in the further procedure. Sometimes the measuring is not exact and leads to buying the new screen and doing the whole process from the start.
Set the new screen properly
After measuring the size properly, fit the screen in the frame carefully. Make sure that the new material fits properly into all four sides of the frame.
If you make a mistake or did not check properly, then it will not set properly, which results in you having to be careful every time during the closing and opening of the window, during winds or thunders.
The Standard window screen replacement requires the experts to do all the tasks professionally.
Install new spline
Once you are done with the above process, use the convex wheel of the screen rolling tool to roll the screen into the frame’s channel, starting at one side and moving around the frame’s perimeter.
As you move about, be sure to maintain the material taut. Next, insert the plastic spline using the concave side of the same tool.
When you perform all these steps carefully, you can only be confident that you have successfully replaced the old window screen on your own.
Now, you are required to take care of the newly installed screen, which is very necessary. Go further for the answer-
After the successful removal of the old damaged screen, you are required to do proper care of the newly installed screen by-
- Regularly cleaning the screen
- Store them in winters & dry seasons to increase their life more
- Windows screens quickly get dirt from insects and other things you must check regularly.
