Canon Pixma inkjet printers display an error message with the number e04 when one or more ink cartridges are not recognized by the printer. Official Canon documentation states that “the FINE Cartridge cannot be identified.” It is possible that these messages will show if you are using refilled or refurbished Canon Printer Error Code E04 that does not have the “FINE” Canon marking. However, this does not imply that you must replace your existing Canon cartridge with a new one; rather, it indicates that the cartridge you currently have inserted is not recognized as being compatible with your printer.
Canon printers rely on a sequence of gold-colored contacts on the front of the cartridge to communicate with the printer, which is the only point of contact for the cartridge. If the contacts are contaminated with dirt, ink, or natural oils from your hands, the notice will be displayed on the screen. The Canon customer service team, on the other hand, indicated that the issue was straightforward to remedy. This article will lead you through some fundamental Canon Printer Error Code E04 troubleshooting techniques as a result. As a result, take the procedures outlined below to resolve the problem as soon as possible.
What Causes Canon Printer Error Code E04?
This error number appears when the printer device is unable to recognize one or more of the ink cartridges included within the printer device itself.
Perhaps the cartridge was not properly entered into the device, which might explain the problem.
An excessive amount of ink or debris on one of the cartridges may hinder the printing machine from properly reading it
When you try to use a remanufactured cartridge, you will have problems.
Canon printer error code E04 and how to fix it
the cartridge should be removed in step 1
In order to begin, remove the Canon printer cartridge from the machine.
To turn off the printer, follow steps 2 and 3 as follows.
To turn off the Canon printer, push the power and reset buttons located on the printer’s main chassis. In the following step, determine whether or not it is necessary to shut it down at the wall.
Third, check the label on the cartridge.
Check the cartridge label to make sure you’re using the correct cartridge in your Canon printer before you start using it.
Contacts should be cleaned in step four.
After that, wipe/clean the contacts on the front of the cartridge with a paper towel or a clean piece of clothing that is free of fibrous tissue (if necessary).
Activate the printer in step 5.
When you are finished, push the power button to reactivate your Canon printer.
Step 6: Change the cartridge in your printer.
Once you’ve finished, place the cartridge into the cradle, making sure it’s in the correct color or black portion.
We hope that when you have performed all of the actions mentioned above, your problem will have been addressed. You should, however, consult a specialist as soon as the condition persists so that it can be resolved. If you require immediate assistance, contact Canon Printer Customer Support. A staff of highly qualified and skilled technical support specialists is always on hand to assist you with any problems. Thus, you may be assured of receiving prompt and effective solutions to any Canon printer issues. If you experience unexpected Canon printers, please contact us via live chat right away to receive support and complete service.
Also read: https://www.nativesdaily.com/different-packaging-materials-for-custom-cbd-oil-boxes/